R&S®LANCOM Management Cloud – maintenance work on December 6, 2026

The service will be unavailable during maintenance.

Important stability update

The R&S®LANCOM Management Cloud (R&S®LMC) will receive an important stability update. This is an advance notification of the maintenance and its expected impact.

The maintenance will take place on Sunday, December 6, 2026, from 8:00 a.m. until approximately 8:00 p.m.

Important notice: During this period, the entire R&S®LMC and all associated services will be unavailable.
Depending on how you use the platform, this may result in different service limitations.

Devices managed via the R&S®LMC remain fully functional, and network operations continue without interruption. Only cloud-managed hotspots will experience a service interruption.

Once the maintenance is complete, the R&S®LMC will be available again as usual.

The end of the maintenance window will be announced on our status page at https://status.cloud.lancom.de.

Icon: Document with exclamation mark as warning icon and check mark in circle

What limitations can you expect during the maintenance?

During the maintenance period, all R&S®LMC functions and services will be unavailable. This means:

  • Web interface: The R&S®LMC web interface will be unavailable. Managing and configuring devices via the R&S®LMC will not be possible during this period.
  • Device connections: Managed devices will be temporarily disconnected from the R&S®LMC. Communication between the devices and the R&S®LMC will not be possible.
  • API interfaces: The APIs of all services will be unavailable. Applications and automation scripts will therefore be unable to access the API endpoints.
  • Preclaiming and pairing: Preclaiming and pairing devices with the R&S®LMC will not be possible during the maintenance period.
    This also applies to preclaiming for Private R&S®LMC environments.
  • Monitoring data: Monitoring data will be lost during the maintenance window, resulting in a permanent data gap for this period.
  • Logging data (SIEM): Project- and device-specific log entries will not be recorded during the maintenance period.
    The resulting data gaps can be filled by taking the preparatory measures described below.
  • R&S®LMC IP addresses: The IP addresses of the R&S®LMC will change as part of the maintenance.

Impact on individual functions and services

Depending on how you use the R&S®LMC, please be aware that the following functions and services will be affected:

  • Hotspot functionality: Authentication via the R&S®LMC hotspot service will not be possible during the maintenance period.
  • LTA connections: Authentication of LTA connections may not be possible during the maintenance period.
  • SIEM system integration: The forwarding of information and updating of data via the R&S®LMC may be interrupted during the maintenance period.
  • Dynamic DNS (DynDNS): Registering new IP addresses and updating existing IP addresses via the R&S®LMC DynDNS service will not be possible during the maintenance period.
  • Scheduled rollouts: Rollouts via the R&S®LMC cannot be performed during the maintenance period.
  • Scheduled firmware updates: Firmware updates scheduled via the R&S®LMC cannot be executed during the maintenance window.
  • API access and automation scripts: Automation scripts that access API endpoints, for example for provisioning or automatically initiating a web or secure tunnel, will not work during the maintenance period.
Icon: Gear surrounded by four dots at the top, right, bottom, and left, connected by arrows in a clockwise direction

How to prepare for the maintenance

To minimize potential disruptions during the maintenance period, we recommend taking appropriate precautions well in advance. Depending on which R&S®LMC functionalities and services you use, you can adjust certain settings or reschedule planned operations beforehand.

Hotspot functionality

If you use the R&S®LMC hotspot functionality, we recommend making the appropriate adjustments to your configuration before the maintenance begins. Detailed instructions are available in this Knowledge Base article.
 

LTA connections

To avoid potential interruptions when authenticating LTA connections, we recommend temporarily increasing the reauthentication timeout. Further information and instructions are available in this Knowledge Base article.

SIEM system integration

If you use an R&S®LANCOM Unified Firewall running LCOS FX 11.2 RU3 or later, the relevant information will be buffered for up to 12 hours. This allows the data to be forwarded once the connection to the R&S®LMC has been restored. We therefore recommend updating your firmware if you have not already done so.

Dynamic DNS (DynDNS)

If you use Dynamic DNS, we recommend taking appropriate precautions before the maintenance begins. Details on the required settings are available in this Knowledge Base article.

Scheduled rollouts and firmware updates

Please review your scheduled rollouts and firmware updates and ensure that no time-controlled operations are scheduled during the maintenance window. If necessary, reschedule them for a time after the maintenance has been completed.

API access and automation scripts

Review your automation scripts and applications that access the APIs or the R&S®LMC. We recommend temporarily disabling the relevant scripts for the duration of the maintenance.

Preclaiming and pairing

Since preclaiming and pairing devices will not be possible during the maintenance period, we recommend postponing any planned device deployments and rollouts until after the maintenance has been completed.

Icon: Checked off checklist with pen

What should you check after the maintenance?

Once the maintenance is complete, the R&S®LMC will be available again as usual. To ensure a smooth transition, we recommend checking the following items and reverting any temporary changes made before the maintenance, if necessary.

Device connections

Check that all managed devices have successfully reconnected to the R&S®LMC. Please note that the public IP addresses of the R&S®LMC may have changed as part of the maintenance. If necessary, adjust any restrictions configured for communication between your devices and the R&S®LMC.

Hotspot functionality

If you made changes to your hotspot configuration before the maintenance in accordance with this Knowledge Base article, revert these changes once the maintenance is complete.

LTA connections

If you temporarily increased the reauthentication timeout in accordance with this Knowledge Base article, revert the change if necessary.

Automation scripts and API access

Re-enable any automation scripts that were previously disabled and verify that they are functioning correctly and that the required API interfaces are accessible.

Do you need support?

If you have any technical questions or a need for manufacturer support, feel free to contact our support team via the support portal. Further contact options can be found on the support contact website.

To the support portal